Belkin OmniViewIP 5000HQ Manual do Utilizador descarregar pdf (Página 14)

OmniView IP 5000 HQ

SECTIONS

Table of Contents

1 3 5 7 9 11 13 15 17 192 4 6 8 10 12

20 21

SETTING UP THE SYSTEM

Set up the Belkin KVM-over-IP systems according to their user manuals’

instructions. In order to be managed by OmniView IP 5000HQ, all

Belkin KVM-over-IP devices must be configured to be OmniView IP

HQ-enabled. This is done from the “Network Configuration” page of

each KVM-over-IP device.

Also in the OmniView IP HQ section in Figure 10, specify how the

OmniView IP 5000HQ server detects the IP device. This can be done

either by:

Manager Auto Discovery – When checked, OmniView IP 5000HQ

automatically detects the IP device if it resides on the same

network segment.

Manager IP – If the IP device resides on a different segment, type the

static IP address of the OmniView IP 5000HQ Manager. (We advise

typing the static IP address of the OmniView IP 5000HQ Manager even if

the IP device resides on the same network segment as the OmniView IP

5000HQ Manager.)

Install third-party Access Services according to their own installation

and configuration instructions. See the “Configuring Access Services”

section on page 55 for details required for the integration of the Access

Services into the OmniView IP 5000HQ system.

Figure 10 Enabling HQ for OmniView IP 5XXXG series

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 108 109

Sem comentários

Belkin OmniViewIP 5000HQ Manual do Utilizador Página 14