Belkin ADSL Modem with Wireless 802.11g Router Manual do Utilizador descarregar pdf (Página 68)

6968

Setting Up your Computers

6968

In order for your computer to properly communicate with your Router, you

will need to change your computer’s “TCP/IP / Ethernet” settings to “Obtain

an IP address automatically / Using DHCP”. This is normally the default

setting in most home computers.

You can set up the computer that is connected to the ADSL modem FIRST

using these steps. You can also use these steps to add computers to your

Router after the Router has been set up to connect to the Internet.

Manually Configuring Network Adapters

in Windows XP, 2000, or NT

1. Click “Start”, “Settings”, then “Control Panel”.

2. Double-click on the “Network and dial-up connections” icon (Windows

2000) or the “Network” icon (Windows XP).

3. Right-click on the “Local Area Connection” associated with your

network adapter and select “Properties” from the drop-down menu.

4. In the “Local Area Connection Properties” window, click “Internet

Protocol (TCP/IP)” and click the “Properties” button. The following

screen will appear:

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 107 108

Sem comentários

Belkin ADSL Modem with Wireless 802.11g Router Manual do Utilizador Página 68