Belkin F5D52314 - Cable/DSL Gateway Router Manual do Utilizador descarregar pdf (Página 21)

capability, use the MU command at the ENTER NEXT COMMAND prompt and

go to page for Change Device.

5. Verify the LANCNC-FAD device matches the baud rate expected. The

LANCNC.INI file sets the baud rate on the device. Otherwise, 38,400 is the

default.

6. The LANCNC-FAD command set requires a plus to be used instead of the enter

key. After entering a command, end the command with a plus and do not press the

enter key or return key.

7. The CD,10 and CD,8 commands are CNC commands, not “plus” commands for

the LANCNC-FAD device. Press the enter key after the CD commands, do not

press a plus key at the end of the commands.

Problem: The CNC gives an error that the command is not recognized.

1. The LANCNC-FAD command set requires a plus to be used instead of the enter

key. After entering a command, end the command with a plus and do not press the

enter key or return key.

2. The CD,10 and CD,8 commands are commands for the CNC and not the

LANCNC-FAD. Press the enter key after the CD commands. Do not press a plus

key at the end of CD commands.

Problem: Program stops for no apparent reason when using DNC mode.

1. Use the DNCX X-modem feature if available on the Fadal.

2. Certain Fadal versions require comment block lines to have an N word on the

comment line. If they do not have the N word, the CNC will give an error. Delete

the comments or add N words to the comment lines. The same comment line can

be used if desired. The LANCNC dynamically adds an N1 before a comment

character. The comment character must be the first character in the line.

Problem: Part of the file is missing.

1. When using a PC, always use the “Safely remove hardware” icon before

removing the SD card from a computer.

2. On the LANCNC-FAD device, wait for the file to be completely saved after

punching.

3. There is not enough room on the SD card to save the file completely.

- 21 -

1 2 ... 16 17 18 19 20 21 22

Sem comentários

Belkin F5D52314 - Cable/DSL Gateway Router Manual do Utilizador Página 21