
Installing and Setting Up the Adapter
Belkin Powerline Network Adapters allow
you to extend your network over your home’s
existing wiring.
1. Plug the Adapters into power outlets; one in
the room with your other network equipment,
and the other in a room where you would like
to have network access. When the Adapters
recognize one another, their Powerline Data
lights will glow.
Note: Do not plug the Adapter into a
power strip; doing so may degrade
networkperformance.
2. Connect one of the Adapters to your existing
modem or router with a network cable. Use
a second network cable to connect the other
Adapter to a computer or other network
device such as a wireless access point,
set-top box, or gaming console.
Quick Installation Guide
Knowing Your Belkin
Powerline AV500
Network Adapter
Power LED
Solid Green – Adapter
running normally
Blinking Green
– Adapter is resetting
– Adapter is in the process of
password synchronization
Off – Adapter powered off
Ethernet Link LED
Solid Green – 10/100/1000Mbps
port linked
Blinking Green – Data transmitting
or receiving
Off – No Ethernet link
Data LED
Color Green – Link rate excellent:
greater than 80Mbps
Color Amber – Link rate between 10
and 80Mbps
Color Red – Link rate less than
10Mbps
Off
– Encryption setup failure
– Adapter not connected to
powerline network
POWERLINE AV500
Max. 300m
NETWORK ADAPTER
Comentários a estes Manuais