Belkin F5D7634-4A-H Manual do Utilizador descarregar pdf (Página 59)

G Wireless Modem Router

SECTIONSTable of Contents 1 2 3 4 5 7 8 9 10

MANUALLY CONFIGURING NETWORK ADAPTERS

Setting up your Computers

In order for your computer to properly communicate with your Router, you will need to change your computer’s “TCP/IP/Ethernet” settings to “Obtain

an IP address automatically/Using DHCP”� This is normally the default setting in most home computers�

You can set up the computer that is connected to the ADSL modem FIRST using these steps� You can also use these steps to add computers to your

Router after the Router has been set up to connect to the Internet�

1. Click “Start”, “Settings”, then “Control Panel”�

2. Double-click on the “Network and dial-up connections” icon

(Windows 2000) or the “Network” icon (Windows XP)�

3. Right-click on the “Local Area Connection” associated

with your network adapter and select “Properties” from the

drop-down menu�

4. In the “Local Area

Connection Properties”

window, click “Internet

Protocol (TCP/IP)” and click

the “Properties” button� The

following screen will appear:

Windows XP, 2000, or NT

5. If “Use the following IP

address” (2) is selected,

your Router will need to

be set up for a static IP

connection type� Write the

address information in the

table below� You will need

to enter this information into

the Router�

6. If not already selected, select “Obtain an IP address automatically”

(1) and “Obtain DNS server address automatically” (3)� Click

“OK”� Your network adapter(s) are now configured for use with

the Router�

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 93 94

Sem comentários

Belkin F5D7634-4A-H Manual do Utilizador Página 59