Belkin F5D8630 Manual do Utilizador descarregar pdf (Página 13)

Setting Up your Computers

section

In order for your computer to properly communicate with your Router, you

will need to change your computer’s “TCP/IP Ethernet” settings to “Obtain

an IP address automatically/Using DHCP”. This is normally the default

setting in most home computers.

You can set up the computer that is connected to the ADSL modem FIRST

using these steps. You can also use these steps to add computers to your

Router after the Router has been set up to connect to the Internet.

Manually Configuring Network Adapters in Windows XP, 2000, or NT

Click “Start”, “Settings”, then “Control Panel”.

2. Double-click on the “Network and dial-up connections” icon

(Windows 2000) or the “Network” icon (Windows XP).

3. Right-click on the “Local Area Connection” associated with your

network adapter and select “Properties” from the drop-down menu.

4. In the “Local Area Connection Properties” window, click “Internet

Protocol (TCP/IP)” and click the “Properties” button. The following

screen will appear:

5. If “Use the following IP address” (2) is selected, your Router will need to

be set up for a static IP connection type. Write the address information

the table below. You will need to enter this information into the Router.

6. If not already selected, select “Obtain an IP address automatically”

(1) and “Obtain DNS server address automatically” (3). Click “OK”.

Your network adapter(s) are now configured for use with the Router.

(1)

(2)

(3)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 91 92

Sem comentários

Belkin F5D8630 Manual do Utilizador Página 13