Belkin Range Extender/ Access Point Manual do Utilizador descarregar pdf (Página 23)

2120

Using the Web-Based Advanced User Interface

2120

Using the Web-Based Advanced User Interface

reside in. The default channel is 11 (unless you are in a country that

does not allow channel 11). The channel can be changed if needed. If

there are other wireless networks operating in your area, your network

should be set to operate on a channel that is different than the other

wireless networks. For best performance, use a channel that is at least

five channels away from the other wireless network. For instance, if

another network is operating on channel 11, then set your network to

channel 6 or below. To change the channel, select the channel from

the drop-down list. Click “Apply Changes”. The change is immediate.

Note: When using the WURE in “Wireless Repeater Mode,” the

channel of your WURE must match the channel of your parent access

point. For easy configuration, set the channel of your WURE to “Auto”.

Change the channel of the parent access point. The channel or the

WURE will automatically match the parent access point.

Using the Broadcast SSID Feature

Note: This advanced feature should be employed by advanced

users only.

For security, you can choose not to broadcast your network’s SSID.

Doing so will keep your network name hidden from computers that

are scanning for the presence of wireless networks. To turn off the

broadcast of the SSID, remove the check mark from the box next

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 56 57

Sem comentários

Belkin Range Extender/ Access Point Manual do Utilizador Página 23