Belkin Vision Wireless Router N1 Manual do Utilizador descarregar pdf (Página 58)

5554

Using the Web-Based Advanced User Interface

5554

1. Wi-Fi Protected Setup (WPS): Enabled or Disabled.

2. Personal Identification Number (PIN) Method: In this method,

a wireless client wishing to access your network must supply

a 4- or 8-digit PIN to the N1 Vision. After clicking “Enroll”, you

must start the WPS handshaking procedure from the client within

two minutes.

3. Router PIN: If an external registrar is available, you may enter in

the N1 Vision’s PIN to the registrar. Click “Generate New PIN”

to change the PIN from the default value. Click “Restore Default

PIN” to reset the PIN value.

4. Push Button Configuration (PBC) Method: PBC is an alternate

method to connect to a WPS network. Push the PBC button

located on the back of the N1 Vision for three seconds, and

then initiate the PBC on the client device. Alternatively, push the

“Start PBC” soft button to start this process.

5. Manual Configuration Method: This section lists the default

security settings if not using WPS.

The N1 Vision features WPA2, which is the second generation of the

WPA

™

based 802.11i standard. It offers a higher level of wireless

security by combining advanced network authentication and stronger

Advanced Encryption Standard (AES) encryption methods.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 113 114

Sem comentários

Belkin Vision Wireless Router N1 Manual do Utilizador Página 58