Belkin Vision Wireless Router N1 Manual do Utilizador descarregar pdf (Página 87)

8382

Manually Configuring Network Settings

section

Set up the computer that is connected to the cable or DSL modem

FIRST using these steps. You can also use these steps to add

computers to your N1 Vision after the N1 Vision has been set up to

connect to the Internet.

Manually Configuring Network Settings in Mac OS up to 9.x

Pull down the Apple menu. Select “Control Panels” and

select “TCP/IP”.

2. You will see the TCP/IP control panel. Select “Ethernet Built-In”

or “Ethernet” in the “Connect via:” drop-down menu (1).

3. Next to “Configure”

(2), if “Manually” is

selected, your N1

Vision will need to be

set up for a static IP

connection type. Write

the address information

in the table below.

You will need to enter

this information into

the N1 Vision.

4. If not already set, at “Configure:”, choose “Using DHCP Server”.

This will tell the computer to obtain an IP address from the

N1 Vision.

(1)

(2)

5. Close the window.

If you made any changes, the following window will appear.

Click “Save”.

Restart the computer. When the computer restarts, your network

settings are now configured for use with the N1 Vision.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 113 114

Sem comentários

Belkin Vision Wireless Router N1 Manual do Utilizador Página 87